DSD-Engineering E-Permitting Process
NOTE: INTERNET EXPLORER is the recommended Browser. Other Browsers may not fully support Adobe Online Forms.
Our DSD-Engineering E-Permitting process is to help streamline the permitting process for certain permit types. E-permits will be accepted via fillable Adobe PDF E-forms submission as outlined below.
This new process will allow for the electronic submittal, routing, review and issuance of approved e-permit types. It will also take the DSD-Engineering department one step closer toward our ultimate goal of a paperless permit process.
To use the e-permitting service, you must first ensure that you have all supporting documentation either scanned or in electronic format (Adobe pdf format required).
INSTRUCTIONS for Electronic Submittal of Permit Package:
**PERMIT PACKAGE WILL BE IMMEDIATELY REJECTED IF MISSING ANY OF THESE (5) MINIMUM REQUIREMENTS.**
Site Plan showing ALL proposed work.
Franchise Utility Permit Application (on latest form).
Franchise Utility Checklist (on latest form).
Copy of City Utility Atlas Maps (per checklist).
User Registration Form (if not yet registered annually; see links below).
If there is additional information needed, you will be notified via email or phone. If your application is complete, you will be emailed an official permit for you to print and post at the job site.
We will accept e-permit applications from City-registered contractors. See below for specific DSD-Engineering permits allowable via e-permitting (at this time).
|Allowable E-permit Types||Instructions|
|Franchise Utility Permits (Gas, Electric, Fiber/Telecommunications)||Shown Below|
|Communications Facilities in the Public Right-of-Way (Small Cell/5G Technology)||Shown Below|
User Registrations - Annual Registration (register once per year):
2. Total File size Greater than 25 MB (25,000 KB):
a. First, try to Reduce file size: 1. Adobe-Save as Other-Reduced Size PDF or 2. WinZip of PDF
b. OR if the file size is still over the limit, Request Access to City SERV-U using this LINK
Notes specific for COMMUNICATIONS (SMALL CELL/5G) Engineering Permit (GFSMCELL): Submitted electronically using the button below; However, the corresponding Electrical Permit (EMISCELL) is currently still submitted in hardcopy through the City DSD clerks (instructions below).
COMMUNICATIONS PERMITTING STEPS:
1. Apply using button above.
2. After DSD-Engineering has tentatively approved the GFSMCELL permit, the Utility Company will apply for an Electrical Miscellaneous Cell Sub-Permit (EMISCELL) following the procedure outlined below:
a) Select this link: Electrical Sub-Permit Instructions & Application
b) After Electrical Sub-Permit has been obtained, the Utility Company must submit for Maintenance of Traffic (MOT) approval from Transportation and Mobility (TAM). Click this Link for TAM-MOT procedures.
c) Once TAM has notified DSD-Engineering that the MOT has been approved, DSD-Engineering will assemble the final permit package and notify the applicant via E-mail.
NOTE: For your Benefit and to save permit processing time: DO NOT APPLY FOR MOT UNTIL BOTH GFSMCELL & EMISCELL PERMITS HAVE BEEN APPROVED.
E-PERMITTING GUIDELINES: Once your E-Permit application is received by DSD-Engineering Services, it will be processed on a "first-come, first-served" basis. When we have completed the processing, we will email you a validated copy of the permit.
A GROUGH inspection will be scheduled automatically for you upon Permit Issue.
For GJOBCHECK and GFINAL inspections, please request by calling 954-828-5191 or via EGOVPLUS ONLINE SERVICES, (Enter your permit number, select Permit No, select "Inspections" tab, then "Request Inspections" ). This link may also be used for Permit Status Checking 24/7.
To closeout Permits:
Provide As-built to DSD-Engineering Plan Reviewers via E-mail using this LINK. (Refer to notes above on file size limits).
If you do not currently have an email address, please note that there are several simple options you can use to obtain one for free.
Please feel free to contact DSD-Engineering Administration, 954-828-5232, DEngineeringAdmin@fortlauderdale.gov if you have any questions or comments on the procedure.